|
Tape Dispensers for Pressure Sensitive Tape
Since 1983
13093 Old Ridge Road
Beaverdam Virginia 23015
1-800-899-9389
quality products - superior
customer support
Pressure Sensitive Tape Dispensers
NPS 150 Tapemate II
Superior To All Other Models
National Package Sealing Model 150 designed for pressure sensitive tape. Excellent for pre-pack and sub-assembly work. Faster then pull/tear, the 150 will save time, material, and is safer to use. Cuts lengths of tape from 1"-39". Extremely accurate, the 150 allows you to set lengths in 1/20" increments! 1mm when set for metric. This unit can handle almost any type of pressure sensitive tape, even adhesive transfer tapes when equipped with special feed roller!
3 Dispensing Modes:
Automatic - After each piece is dispensed, cut, and removed by operator, another piece is automatically dispensed
Manual - The next piece is dispensed when operator presses "Cycle Start" key
Random - Operator presses key for random (non-measured) length
Safer Operation - The 150 stops immediately if anything contacts the cutter assembly before it cuts the tape!
The Premier Pressure Sensitive Tape Dispenser Dual motor control allows you to adjust dispensing speed to dispense any type of pressure sensitive tape with ease. The 150 also features Automatic Shut Off if a tape jam should occur. Built-in memory allows the 150 to remember control settings even when the machine is turned off! Specs: Adjustable Dispensing Speed: 1"per second-5"per second 3 Dispensing Modes automatic/manual/random Pressure Sensitive Key Pad Built-In Memory- 150 remembers last programmed length even if power is lost Power Feed Forward & Reverse - For loading/unloading machine Tape: 3/8"-2" wide on standard 3" cores Maximum Roll Diameter: 8" Shipping Weight: 20 pounds Counter Space: 8-1/2" x 8-1/4" Height: 11"
Tigerseal® Products is not affiliated with MCM/Phoenix® Tigerseal® Products is not affiliated with Better Packages® Inc.
|